Dekoder med fjernkontroll

TV

For information on how to setup Altibox TV set-top box click here

 

 

fibersentral


ICOTERA fiber modem -  with built-in router/wifi

Icotera fibersentral
 

  1. Make sure your fiber modem is powered on and that you have ordered services from Varanger KraftFiber.
     
  2. Your network name (SSID) and password are printed on the sticker attached to the fiber modem.

    Tip: If you have a smartphone or tablet, open the camera app and scan the QR code (the square mosaic image) on the sticker to connect to Wi-Fi without typing the password!

  3. To change your password, log in to your router’s configuration page by visiting 192.168.7.1 in a web browser:
    • Username: admin
       
    • Password: varangerbynett
       
    • Note: We recommend changing this password after logging in.
       
  4. If you are using your own wireless router, please contact customer service by email at kundeservice@varanger-kraftfiber.no or by phone at 78962630 to inform us.

    You must connect your own wireless router (use the port labeled INTERNET or WAN) to LAN-port number 4 on the fiber modem (often labeled Port4 at the bottom of the modem).


     

     

ICOTERA fiber modem -  without built-in router/wifi

Icotera fibersentral

  1. Make sure your fiber modem is powered on and that you have ordered services from Varanger KraftFiber.
     
  2. To connect to the internet wirelessly, you need to connect your own wireless router to the fiber modem.
     
    • Connect your wireless router (use the port labeled INTERNET or WAN) to LAN-port number 4 on the fiber modem (often labeled Port4 at the bottom of the modem).
    • Important: When your own wireless router is connected to the fiber modem, nothing else should be connected to the fiber modem. If you need internet for set-top boxes, tablets, mobile phones, computers, home alarms, etc., these devices must then be connected to your wireless router.
       

  3. When using your own wireless router, you are responsible for settings such as Wi-Fi name and password. If you have forgotten your Wi-Fi password, you must reset your router to factory settings and perform the initial setup. See your router’s user manual for instructions.

  4. If you would like to upgrade to a fiber modem with a built-in router/Wi-Fi, contact customer service by email at kundeservice@varanger-kraftfiber.no or by phone at 78962630. There is a fee of NOK 990,- for the upgrade. If you have an older type of fiber modem, the upgrade will be free of charge.

 


Nokia Beacon 2 - Wireless Router

Nokia Beacon 2 RouterNokia Beacon 2 Router Rear

  1. Make sure your fiber modem and wireless router is powered on and that you have ordered services from Varanger KraftFiber.
     
  2. Download the app for Nokia Beacon 2 (Android, Apple/iOS) for step-by-step setup assistance and to manage your wireless router.
     
  3. Use a network cable to connect the blue port labeled WAN/LAN2 on the Nokia Beacon 2 to LAN-port number 4 on the fiber modem (often labeled Port4 at the bottom of the modem).
     
  4. Your Wi-Fi name and password are printed on the sticker on the underside of the Nokia Beacon 2:

    -Wi-Fi name (SSID) is shown next to "SSID".

    -Wi-Fi password is shown next to "Wi-Fi Key".

     

  5. If you have questions or need assistance, please contact our customer service by email at kundeservice@varanger-kraftfiber.no or by phone at 78962630.
     

  6. Learn more about the Nokia Beacon 2 wireless router here.